rus
TS_pub
technospheramag
technospheramag
ТЕХНОСФЕРА_РИЦ
Competent Opinion
A.Ignatov
Ten Years of Success: Photonics Market and Laser Technologies (2004–2015) In a survey disclosed by a top Russian expert in welding and laser technologies on the basis of information from VDW association, laser association LAC, Optech Consalting. Strategies Unlimited and well known economists and specialists an analysis of the dynamics of photonics and laser technologies market trends covering a ten-year period is given. The survey deserves careful attention of Specialist engineers, leading managers of machine and ship building, aerospace and vehicle, oil and gas and other Russian industrial branches.
Ten Years of Success: Photonics Market and Laser Technologies (2004–2015) In a survey disclosed by a top Russian expert in welding and laser technologies on the basis of information from VDW association, laser association LAC, Optech Consalting. Strategies Unlimited and well known economists and specialists an analysis of the dynamics of photonics and laser technologies market trends covering a ten-year period is given. The survey deserves careful attention of Specialist engineers, leading managers of machine and ship building, aerospace and vehicle, oil and gas and other Russian industrial branches.
Technologies and Technology Equipment
М. Abdulkadyrov, А. Semenov
MODERN METHODS FOR PRODUCTION OF ASTRONOMICAL AND SPACE MIRRORS This article describes the production technology of astronomical and space mirrors from Astrositall CO-115M including its properties and their stability over time and presents the results of long-term testing of the material. The article also describes computer-controlled methods of large-sized optics fabrication and testing using the examples of production of mirrors for large international astronomical projects.
MODERN METHODS FOR PRODUCTION OF ASTRONOMICAL AND SPACE MIRRORS This article describes the production technology of astronomical and space mirrors from Astrositall CO-115M including its properties and their stability over time and presents the results of long-term testing of the material. The article also describes computer-controlled methods of large-sized optics fabrication and testing using the examples of production of mirrors for large international astronomical projects.
S.Mayssner
Why Extraction and Filtration Technology is so important? The technologies of connection, separation, marking, drilling, sintering and milling, the utilisation of fluxes, 3D-printing processes, rapid prototyping by means of laser, soldering and gluing – all these processes generate harmful substances that might have extreme health impacts. Manufacturing processes have gained in complexity, and resulting pollutants have become smaller and particularly more exotic. Capturing and Filtering of airborne Substances is anything but simple.
Why Extraction and Filtration Technology is so important? The technologies of connection, separation, marking, drilling, sintering and milling, the utilisation of fluxes, 3D-printing processes, rapid prototyping by means of laser, soldering and gluing – all these processes generate harmful substances that might have extreme health impacts. Manufacturing processes have gained in complexity, and resulting pollutants have become smaller and particularly more exotic. Capturing and Filtering of airborne Substances is anything but simple.
Conferences, exhibition & seminars
V.Kondratenko
Scientific Conference at the Moscow State Institute of Radio Engineering, Electronics and Automation. IVT–2015 In April 6–7 at the Moscow State University of Instrument Engineering and Computer Science’ Institute of High Technologies an International scientific and technical conference Informatics and Technologies. Innovation technologies in Industry and Informatics was held. The conference gathered instrumentation and mechanical engineering specialists that use photonic technologies.
Scientific Conference at the Moscow State Institute of Radio Engineering, Electronics and Automation. IVT–2015 In April 6–7 at the Moscow State University of Instrument Engineering and Computer Science’ Institute of High Technologies an International scientific and technical conference Informatics and Technologies. Innovation technologies in Industry and Informatics was held. The conference gathered instrumentation and mechanical engineering specialists that use photonic technologies.
Tags: instrumentation engineering mechanical engineering photonic technologies машиностроение приборостроение фотонные технологии
Additive Technologies
N.Steshenkova, G.Turichin, O.Raykis
Metal Working: High Technology Machining Tools or additive Technologies Jump on the bandwagon of additive technologies gossip leads now and then to the escape notice the opinion of the acknowledged laser technology experts. Under the conditions of future processing equipment renovation that will be realized under the conditions of economic uncertainties when on the wave of crisis whole industrial niches escape the opinion of well informed and sophisticated specialists is of particular interest. Some of them we met at the Moscow exhibition Photonics 2015 and learned their view.
Metal Working: High Technology Machining Tools or additive Technologies Jump on the bandwagon of additive technologies gossip leads now and then to the escape notice the opinion of the acknowledged laser technology experts. Under the conditions of future processing equipment renovation that will be realized under the conditions of economic uncertainties when on the wave of crisis whole industrial niches escape the opinion of well informed and sophisticated specialists is of particular interest. Some of them we met at the Moscow exhibition Photonics 2015 and learned their view.
V.Birukov
Increasing Wear Resistance Of Machine Parts For Laser Cladding The results of the study of mode laser cladding powder material based on nickel (measuring 40–150 µm) using a fiber laser with a variable power range 500–3000 W, are presented. Moving speed of the substrate was 5–25 mm/s.
Increasing Wear Resistance Of Machine Parts For Laser Cladding The results of the study of mode laser cladding powder material based on nickel (measuring 40–150 µm) using a fiber laser with a variable power range 500–3000 W, are presented. Moving speed of the substrate was 5–25 mm/s.
Tags: additive manufacturing laser cladding laser metal deposition (lmd) resistance selective laser melting (slm) аддитивная технология изностойкость лазерная наплавка прямое лазерное выращивание (лазерная порошковая наплавка – lmd) селективное лазерное выращивание (slm)
O.Raykis
Diode Lasers for Laser Cladding: status quo – quo vadis In the last couple of years new applications for lasers emerge from technological improvements in laser sources. They are replacing many traditional methods of industrial manufacturing, in particular welding, brazing and heat treatment. Another example for new applications enabled by the technological progress is laser cladding.
Diode Lasers for Laser Cladding: status quo – quo vadis In the last couple of years new applications for lasers emerge from technological improvements in laser sources. They are replacing many traditional methods of industrial manufacturing, in particular welding, brazing and heat treatment. Another example for new applications enabled by the technological progress is laser cladding.
Tags: additive manufacturing corrosion & wear protection laser cladding repair аддитивная технология восстановление защита от коррозии и износа лазерное плакирование
Lasers & Laser Systems
M. Starikova, I.Kuznetsova, N.Kostyukova
Laser Photo-Acoustic Spectrometer for Medical Gas-Analysis Laser photo-acoustic spectrometer based on optical parametric oscillator for medical gas analysis is presented. Designed spectrometer allows analyzing the absorption spectra of the twenty gaseous biomarkers in real time in the spectral range from 2.5 to 10.7 µm. The spectrometer capabilities for medical diagnostics of some bronchopulmonary diseases of different etiologies are demonstrated.
Laser Photo-Acoustic Spectrometer for Medical Gas-Analysis Laser photo-acoustic spectrometer based on optical parametric oscillator for medical gas analysis is presented. Designed spectrometer allows analyzing the absorption spectra of the twenty gaseous biomarkers in real time in the spectral range from 2.5 to 10.7 µm. The spectrometer capabilities for medical diagnostics of some bronchopulmonary diseases of different etiologies are demonstrated.
Tags: laser medical diagnostics laser photo-acoustic spectrometer лазерная медицинская диагностика оптико-акустический спектрометр
M.Belkin, V.Yakovlev
VCSEL Photonics – New optoelectronic method for RF signals processing. Part 1. Component Base Acronym VCSEL Photonics is a dominative of Vertical-cavity surface-emitting laser (VCSEL). Devices on the VCSEL base have a number of vantage features thanks to which this discipline is being developed abroad at an intensive rate. What kind of VCSEL components are accessible today, what are their characteristics and capabilities? The answer you can find in this review written by two well known specialists, one of which is developing VCSEL Photonics many years and the other creates optoelectronic and radioelectronic systems on their base.
VCSEL Photonics – New optoelectronic method for RF signals processing. Part 1. Component Base Acronym VCSEL Photonics is a dominative of Vertical-cavity surface-emitting laser (VCSEL). Devices on the VCSEL base have a number of vantage features thanks to which this discipline is being developed abroad at an intensive rate. What kind of VCSEL components are accessible today, what are their characteristics and capabilities? The answer you can find in this review written by two well known specialists, one of which is developing VCSEL Photonics many years and the other creates optoelectronic and radioelectronic systems on their base.
Tags: laser photonics radiophotonics vcsel vcsel photonics викселоника лазер поверхностно-излучающий лазер с вертикальным резонатором радиофотоника фотоника
Fiber-Optic Technoligies
V. Semenova, V. Bespalov
Terahertz Technologies for Telecommunications The growing amount of transmitted data requeres higher throughput H-channel wireless networks. It has been shown that the most advanced solution are wireless terahertz (THz) communication systems on the photonic technology base. This paper is devoted to the recent progress in implementation and application of the photonic-based THz communication systems.
Terahertz Technologies for Telecommunications The growing amount of transmitted data requeres higher throughput H-channel wireless networks. It has been shown that the most advanced solution are wireless terahertz (THz) communication systems on the photonic technology base. This paper is devoted to the recent progress in implementation and application of the photonic-based THz communication systems.
Tags: telecommunications terahertz radiation wireless access беспроводной доступ телекоммуникации терагерцевое излучение
Optoelectronic Devices
A.Ptizin
Visible And Invisible Infrared Radiation Solution of many problems of various human activities require special-propose machinery and devices that enhance fundamental sensory organs physical capacities. Design office ViTA’s produced serial and customized short-wave IR cameras belong to this devices.
Visible And Invisible Infrared Radiation Solution of many problems of various human activities require special-propose machinery and devices that enhance fundamental sensory organs physical capacities. Design office ViTA’s produced serial and customized short-wave IR cameras belong to this devices.
Tags: detection of laser designators night vision short-wave infrared (swir) light swir-излучение target recognition ночное видение обнаружение лазерных целеуказателей обнаружение целей
B. Matveev
On the Question of terminology in the medium wave infrared optoelectronics Here we consider peculiarities and aspects of negative luminescence, radiant refrigeration and apparent temperature, response time, quantum yield and efficiency terms with respect to their use in the papers that refer to mid-IR (λ=3–7 μm ) optoelectronics particularly to LEDs and photodiodes.
On the Question of terminology in the medium wave infrared optoelectronics Here we consider peculiarities and aspects of negative luminescence, radiant refrigeration and apparent temperature, response time, quantum yield and efficiency terms with respect to their use in the papers that refer to mid-IR (λ=3–7 μm ) optoelectronics particularly to LEDs and photodiodes.